Here in the Frequently Asked Questions(
) section we have compiled a list of questions that you may ask or encounter. The questions have been listed in random order and not in any order of relevance.
What is the difference between "KVA rating" and "KW rating" of UPS?
What is the Input Power Factor (p.f.) of the UPS at different loads?
How much is the static switch transfer time (Break in output ) in Asynchronous and Synchronous mode if inverter fails?
What is the maximum rating of the UPS offered by ENP ?
How to arrive at correct UPS capacity for a given load?
What is the % total harmonic distortion (%THD) of the UPS output voltage and how it is measured?
What is the overload capacity of the UPS?
What is the type of load applied to UPS during testing?
What happens if UPS fans fail?
What is the degree of protection (IP protection) applicable for ENP UPS?
Is UPS output isolated from its input?
Can the UPS output neutral be earthed?
What type of UPS ENPIL is manufacturing?
What is burn in test? How much duration the heat run of standard UPS is carried out ?
Why there is no alarm or indication for any fan failure?
Does ML 3.0 send traps to SNML1.5 client?
How Netcom can be used to send trap to Workstations in the network?
How do I monitor UGXT UPS from some remote location in the Network?
I am using UPS model as PSP and is interested in auto shutdown of workstations, how to go about the same?
Do you offer shutdown of multiple workstations?
What is the difference between the software SiteNet1 and Multilink auto shutdown software's?
What is the difference between the multi port and multi Link?
Do I need to install any client software (Package) to monitor the UPS parameters while using Netcom?
Can I send a message on pager about the status of UPS automatically on any event that occurs on the UPS?
Can I run any scripts on certain events before the shutdown of the OS?
Do you offer shutdown software for linux operating system?
Do you offer shutdown software for windows 2000?
How to monitor S7400M UPS in network?
Why do TLL PEC systems use Electric reheaters?
Please confirm if we can commit 18 deg +/- 1 deg C temperature control and 50 +/-5 RH control with our PAHU with CEMS 100 installed in a switch room. Incase not possible, I would require a technical reasoning also.
What are the requirements for the UGXT machine to be monitored on the NMS?
Network Uptime Solutions
News & Events
Copyright © 2007, Emerson Network Power (India) Pvt. Ltd. All rights reserved.
Terms and Conditions of Use