 |
|
|
|
|
| |
|
|
MultiLink Advanced, version 3.5 - Detailed
Power Monitoring, Automated Shutdown
MultiLink version 3.5, is your scalable network
power protection solution. Run MultiLink on
one machine to monitor your power and ensure
a graceful, unattended shutdown in the event
of an extended power failure. In the one-on-one
configuration, MultiLink will monitor a serially
connected UPS or an SNMP-enabled UPS over
the network. MultiLink can also be upgraded
to support your unique needs.
Purchasing the MultiLink Network Administration
License allows you |
.to
monitor multiple UPS units and remotely configure
other installations of MultiLink throughout
your network Purchasing the MultiLink Network
Shutdown License allows you to efficiently manage
your power protection on a larger UPS by running
MultiLink on one computer and using that computer
to coordinate the shutdown of other computers
throughout your network.
Compatible
Operating Systems: Microsoft Windows
NT/2000/Server 2003/XP/98/ME, AIX, Linux, Sun
Solaris, HP-UX, Novell Netware
|
| |
|
|
MultiLink
Version 1.5 - Automated shutdown for multiple
OS
The MultiLink solution works with your UPS to
provide a simple, easy-to-configure computer
protection solution in a multi-platform networked
environment. From a single workstation to a
network of servers, MultiLink allows you to
monitor UPS status and manage the automatic
orderly shutdown of designated computers if
a power outage ever exceeds the battery capacity
of the UPS. |
| Compatible
Operating Systems: Microsoft Windows
NT/2000/Server 2003/XP/95/98/ME, AIX, HP-UX,
Sun Solaris, Linux, Novell Netware |
.
. . . . .
|
 |
| |
|
Super Switch provides rapid switching
between two independent AC power sources, for
uninterrupted operation of critical electronic
equipment. Super switch proven power switching
technology allows dual AC power paths all the
way up to the critical load, for the ultimate
in AC power system redundancy, power availability
and fault tolerance.
|
A typical function block diagram using the Super
Switch |
 |
.
. . . . .
|
 |
| |
Anywhere
Monitoring! |
 |
NetCom
allows Flexible monitoring from any point of
your network with its embedded web Server
System detectability: It automatically detects
the model of UPS. No need to install any proprietary
UPS monitoring software package. Graphical User
Interface (GUI) software gets down-loaded automatically.
Multiple monitoring: Multiple UPS-status can
be monitored from single or multiple locations.
NMS integration allows you to programme the
card to send critical SNMP traps fro critical
UPS
alarms to your Network Management Console |
.
. . . . .
|
| |
|
 |
|
| |
UPS
interface multiplexer |
 |
When used
in conjunction with MultiLink software, the
SiteNet Multiport multiplexing units communicate
the On Battery and Low Battery status of a
single UPS to multiple PC's, servers, or workstations
utilizing dedicated wiring. The Multiport
8 is a hardware interface box that provides
shutdown communication capability to multiple
computer systems using the same UPS. Each
unit can support up to eight computer systems
and these units can be daisy-chained together
to accommodate more than eight systems. The
Multiport 4 provides UPS communications to
four additional computer systems attached
to a single UPS. The Multiport 4 supports
UPS systems equipped with the Intellislot
communication port and is user-installable
and hot-swappable.
Request for proposal
|
| |
|
| |
|
| |
